
TEST DURATION
200s
COMBINED THRUST · 4 ENGINES
2M lbs
ARTEMIS IV TARGET
2028
RS-25s PER LAUNCH
4
NASA hot-fired RS-25 engine No. 10001 on November 18, 2026, at the Fred Haise Test Stand at Stennis Space Center near Bay St. Louis, Mississippi. The developmental engine ran for the planned duration of 200 seconds — three minutes and 20 seconds. The test was conducted by a combined team from NASA, L3Harris Technologies (prime contractor), and Nova Space Solutions.
Extraction Map
This engine will never leave the ground. Its purpose is entirely instrumental: generate performance and reliability data that feeds back into the production RS-25 engines that will fly on future SLS rockets. Each SLS launch requires four RS-25 engines producing a combined 2 million pounds of thrust. Every flight engine is tested and certified flightworthy at Stennis before integration. The immediate downstream mission is Artemis IV, NASA's Moon landing mission currently targeted for 2028. That flight will launch astronauts aboard Orion from Kennedy Space Center, land at the lunar South Pole, and represent a step toward sustained human presence on the Moon and eventual crewed missions to Mars. The RS-25 is the workhorse engine inherited from the Space Shuttle program, now manufactured by L3Harris under updated production contracts. From a generativity standpoint, this is straightforward capability maintenance. The RS-25 is a known quantity — the engine design dates back decades, and these tests are iterative refinements rather than architectural leaps. The generative value is real but bounded: improving reliability margins on a proven design for a fixed mission cadence. The resilience picture is mixed. On one hand, testing developmental engines to capture data before flight is exactly the kind of risk-reduction discipline that prevents catastrophic failure. On the other, the entire SLS architecture depends on a single engine family from a single prime contractor (L3Harris), creating supply-chain concentration risk that NASA has acknowledged but not diversified away from. Efficiency overhead is the persistent question mark around SLS. The RS-25 is an expensive, expendable engine on a rocket that costs over $2 billion per launch by most estimates. Each engine is thrown away after one flight — a sharp contrast to SpaceX's reusable Raptor engines. The test infrastructure at Stennis is world-class but supports a launch cadence measured in years, not months. This test registers as routine institutional execution — NASA doing what NASA does well, which is meticulous ground testing of flight hardware. There is no novelty in the architecture, the test methodology, or the mission profile. The value is in the data captured and the institutional discipline maintained. The question hovering over all of this is whether the SLS program's pace and cost structure can sustain the Artemis campaign's ambitions through the 2030s, or whether commercial alternatives will force a reckoning.
Worth reading?
OPTIONAL
Score
44
/100
Mildly generative — real engineering data captured for future flights, but locked into an expensive, non-reusable architecture with a single prime contractor and slow cadence.
What Is GRIN?
GRIN stands for Generativity, Resilience, Innovation efficiency, and Novelty openness. These four dimensions capture the essential characteristics of any memetic intelligence — whether a nation, a corporation, a religion, or a movement.
About GRINGenerativity
2/5
Resilience
3/5
Efficiency
2/5
Novelty
1/5
Extractive
2/5
Inverted
Does this create new capability or just redistribute existing value?
Incremental data generation on a proven engine, not a capability leap. Value is real but bounded — improving margins on a 1970s design for missions years away.
Verified Facts (8)
NASA tested RS-25 engine No. 10001 on Nov. 18 on the Fred Haise Test Stand at NASA's Stennis Space Center near Bay St. Louis, Mississippi.
Test teams fired the developmental engine for the planned duration of three minutes and 20 seconds (200 seconds).
This developmental engine will not be used in flight.
L3Harris Technologies is NASA's prime contractor for RS-25.
For the Artemis IV Moon landing mission in 2028, the SLS rocket will launch astronauts aboard the Orion spacecraft from NASA's Kennedy Space Center in Florida.
Four RS-25 engines produce up to 2 million pounds of combined thrust to help launch the SLS rocket.
All RS-25 engines are tested and proven flightworthy at NASA Stennis prior to use.
Tests are conducted by a team of operators from NASA, L3Harris, and Nova Space Solutions.
More latest news
Read all